A review on remediation technologies using functionalized Cyclodextrin

Environmental Science and Pollution Research - Modern lifestyle and alleviated anthropogenic activities have increased the pollutant load, ultimately causing stress on the environment. In...     

Factors and sources influencing ionic composition of atmospheric condensate during winter season in lower troposphere over Delhi, India

Atmospheric condensate (AC) and rainwater samples were collected during 2010–2011 winter season from Delhi and characterized for major cations and anions. The observed order of abundance of cations and anions in AC samples was NH ₄ ⁺ ?>?Ca²⁺?>?Na⁺?>?K⁺?>?Mg²⁺ and HCO ₃ ^? ?>?SO ₄ ^2? ?>?Cl^??>?NO ₂ ^? ?>?NO ₃ ^? ?>?F^?, respectively. All samples were alkaline in nature and Σ _cation/Σ _anion ratio was found to be close to one. NH ₄ ⁺ emissions followed by Ca²⁺ and Mg²⁺ were largely responsible for neutralization of acidity caused by high NO _x and SO₂ emissions from vehicles and thermal power plants in the region. Interestingly, AC samples show low nitrate content compared with its precursor nitrite, which is commonly reversed in case of rainwater. It could be due to (1) slow light-mediated oxidation of HONO; (2) larger emission of NO₂ and temperature inversion conditions entrapping them; and (3) formation and dissociation of ammonium nitrite, which seems to be possible as both carry close correlation in our data set. Principal component analysis indicated three factors (marine mixed with biomass burning, anthropogenic and terrestrial, and carbonates) for all ionic species. Significantly higher sulfate/nitrate ratio indicates greater anthropogenic contributions in AC samples compared with rainwater. Compared with rainwater, AC samples show higher abundance of all ionic species except SO₄, NO₃, and Ca suggesting inclusion of these ions by wash out process during rain events. Ionic composition and related variations in AC and rainwater samples indicate that two represent different processes in time and space coordinates. AC represents the near-surface interaction whereas rainwater chemistry is indicative of regional patterns. AC could be a suitable way to understand atmospheric water interactions with gas and solid particle species in the lower atmosphere.     

Effect of biosludge and biofertilizer amendment on growth of Jatropha curcas in heavy metal contaminated soils

The pot experiments were conducted to evaluate the effect of different concentrations of arsenic, chromium and zinc contaminated soils, amended with biosludge and biofertilizer on the growth of Jatropha curcas which is a biodiesel crop. The results further showed that biosludge alone and in combination with biofertilizer significantly improved the survival rates and enhanced the growth of the plant. With the amendments, the plant was able to grow and survive upto 500, 250 and 4,000 mg kg(-1) of As, Cr and Zn contaminated soils, respectively. The results also showed that zinc enhanced the growth of J. curcas more as compared to other metals contaminated soils. The heavy metal accumulation in plant increased with increasing concentrations of heavy metals in soil, where as a significant reduction in the metal uptake in plant was observed, when amended with biosludge and biofertilizer and biosludge alone. It seems that the organic matter present in the biosludge acted as metal chelator thereby reducing the toxicity of metals to the plant. Findings suggest that plantation of J. curcas may be promoted in metal contaminated soils, degraded soils or wasteland suitably after amending with organic waste.     

Utilizing of Sugar Refinery Waste (Cane Molasses) for Production of Bio-Plastic Under Submerged Fermentation Process

In the present study, depending upon the availability and cheaper cost, different carbon source were tested for the production of PHAs (Polyhydroxyalkonoates) by soil bacterium Pseudomonas aeruginosa and it was found that sugar refinery waste (cane molasses) produced the maximum PHA (biodegradable polymer) which is precursor for bio-plastic development. Urea served as potent nitrogen source over other inorganic nitrogen sources in bio-plastic synthesis. Effect of different physical parameters viz; pH, temperature and agitation speed were also studied on PHA production. Batch cultivation kinetics under optimized cultural and physical condition showed maximum cell mass and PHA concentration of 7.32?±?0.2 and 5.60?±?0.3?g/L, respectively after 54.0?h of cultivation. Sugar refinery waste (Total sugar 4%) and urea (0.8%) improved the economics of the process which exhibited a yield (Y_P/X) of 0.70 with productivity of 0.11?g/L/h. PHA was further characterized as PHB by using Fourier Transform Infra-red Spectroscopy (FT-IR).     

Studies on the removal of nickel from aqueous solutions using modified riverbed sand

This paper highlights the utility of riverbed sand (RS) for the treatment of Ni(II) from aqueous solutions. For enhancement of removal efficiency, RS was modified by simple methods. Raw and modified sands were characterized by scanning electron microscope (SEM), Energy Dispersive Spectroscopy (EDS), and Fourier Transform Infrared Spectroscopy (FTIR) to investigate the effect of modifying the surface of RS. For optimization of various important process parameters, batch mode experiments were conducted by choosing specific parameters such as pH (4.0–8.0), adsorbent dose (1.0–2.0 g), and metal ion concentrations (5–15 mg/L). Removal efficiency decreased from 68.76 to 54.09 % by increasing the concentration of Ni(II) in solution from 5 to 15 mg/L. Removal was found to be highly dependent on pH of aqueous solutions and maximum removal was achieved at pH 8.0. The process of removal follows first-order kinetics, and the value of rate constant was found to be 0.048 min^?1 at 5 mg/L and 25 °C. Value of intraparticle diffusion rate constant (k _id) was found to be 0.021 mg/g min^1/2 at 25 °C. Removal of Ni(II) decreased by increasing temperature which confirms exothermic nature of this system. For equilibrium studies, adsorption data was analyzed by Freundlich and Langmuir models. Thermodynamic studies for the present process were performed by determining the values of ΔG°, ΔH°, and ΔS°. Negative value of ?H° further confirms the exothermic nature of the removal process. The results of the present investigation indicate that modified riverbed sand (MRS) has high potential for the removal of Ni(II) from aqueous solutions, and resultant data can serve as baseline data for designing treatment plants at industrial scale.     

Development of controlled release formulations of thiram employing amphiphilic polymers and their bioefficacy evaluation in seed quality enhancement studies

Controlled release formulations of Thiram (Dimethylcarbamothioylsulfanyl-N,N-dimethylcarbamodithioate), a contact fungicide, have been prepared using laboratory synthesized poly(ethylene glycol) (PEG) based functionalized amphiphilic copolymers. The kinetics of thiram from developed controlled release (CR) formulations were studied in comparison with that of the commercially available 75 WS. Release from the commercial formulation was faster than with the developed CR formulations. Maximum amount of thiram was released on 35th day for PEG-2000 4d, 28th day for PEG-1500 4c, 21st day for PEG-1000 4b and 15th day for PEG-600 4a in comparison to commercial formulation (7th day). The diffusion exponent (n) of thiram in water ranged from 0.356 to 0.545 in the tested formulations. The half-release (t_1/2) values ranged between 14.78 to 22.1 days, and the Period of Optimum Availability (POA) of thiram ranged from 7.79 to 25.15 days. An effort has also been made to identify the suitable polymers that could reduce the seed deterioration during storage and also act as an effective carrier of fungicide thiram. The results demonstrate that the seeds coated with the different formulations deteriorated at a slower pace as manifested in high germination percentage over control. Apart from the fungicidal effect of thiram, the polymers acted as barriers to moisture reducing the rate of seed deterioration and checked the degradation of thiram. The CR formulation 4d, with PEG 2000, was found to be most effective as seed coat.     

Dietary Spirulina platensis alleviates aluminum and aluminum fluoride induced histopathological and biochemical alterations in mice kidney

Aluminum and its salts widely used in our daily life have been reported nephrotoxic to humans and animals following prolonged exposure. Therefore, the present study was made to examine the renoprotective role of Spirulina platensis against Al³⁺ and AlF₃ in male Swiss albino mice. Exposure to these chemicals decreased feed and water intake, and body and kidney weights. Histology of kidney and their biochemistry were also markedly altered along with that of serum biochemistry. Spirulina not only minimize toxic effects of test chemicals but also favored faster recovery of treated mice after their withdrawal.     

Selenium status in food grains of northern districts of India

The selenium status in the food grains of the agricultural lands of northern parts of India was estimated by using the HG-AAS technique. The areas where lesser rains were received or less irrigation water was available in northern Indian states viz. Rajasthan and southern parts of the Haryana had higher selenium levels in food grains. Punjab, Himachal Pradesh and northern parts of the Haryana states had normal levels of selenium in their food grains, except for slightly lower selenium levels in a few areas that were affected by floods along the river Yamuna.     

Toxic effect of stem bark and leaf of Euphorbia hirta plant against freshwater vector snail Lymnaea acuminata

The aqueous stem bark and leaf extracts of plant Euphorbia hirta (family-Euphorbiaceae) have potent molluscicidal activity. Sub-lethal doses (40% and 80% of LC50) of aqueous stem bark and leaf extracts of this plant also significantly (P<0.05) alter the levels of total protein, total free amino acid, nucleic acids (DNA and RNA) and the activity of enzyme protease and acid and alkaline phosphatase in various tissues of the vector snail Lymnaea acuminata in time and dose dependent manner. Euphorbia hirta (family-Euphorbiaceae) commonly known as Dudhi, is a common medicinal plant of India, which is used in variety of diseases i.e. cough, asthma, colic, dysentery, genito urinary diseases.     

Arsenic contamination of the environment: a new perspective from central-east India

This paper reports a regional contamination of the environment in central-east India that does not share geology or boundary with the Bengal Delta Plain. About 30,000 people residing in 30 villages and towns are directly exposed to arsenic and more than 200,000 people are "at risk." Complete geographical extent of this contamination is being established, and this newly reported contaminated area could be quite large. This paper further reports that the mechanisms involved in arsenic mobilisation are complex and the two theories of arsenic mobilisation, i.e., pyrite oxidation and oxyhydroxides reduction, do not fully explain the high levels of arsenic contamination. This paper also proposes the "oxidation-reduction theory" for arsenic mobilisation where the arsenic originates from the arsenopyrite oxidation and the arsenic thus mobilised forms the minerals and gets reduced underground in favourable Eh conditions. The stoppage of water withdrawal from the contaminated sources did not result in lowering of arsenic levels as expected according to the heavy groundwater extraction theory (pyrite oxidation theory). Cases of arsenicosis in the region are on the rise and the switchover to less contaminated water has not reversed the arsenicosis progression in the affected persons even after 2 years. Surface water of the rivers is also being contaminated because of the probable dislocation of contaminated groundwater due to the heavy rains in monsoon season, which indicates that the river water could be a major carrier of arsenic in dissolved or adsorbed forms that may be a cause of contamination of the delta plains.